8
C. OPERATING/PROGRAMMING INSTRUCTIONS - COOK & HOLD-3 PLUSTM CONTROLLER
(For Convection Ovens: CO11-G, CO11-E, COCE, TSCO-E1 & TSDCO-E1)
When lit, denotes
HOUR/MINUTE timing
mode
When lit, denotes
MINUTES/SECONDS
timing mode
When lit, denotes
appliance is at ready
(set) temperature
When lit, oven is heating
to set temperature
When lit, a hold time has
been programmed for
the corresponding
product key
In “programming” mode
used to set a hold time
for corresponding
product key
In “operating” mode
shows actual
temperature when
pressed and held
In “programming” mode,
when lit, denotes this is
the key you are setting;
in “operating” mode
when lit, denotes this is
the active key.
In “programming” mode,
denotes this is the key
you are setting; in
“operating” mode used to
start a timing cycle
Used to start a timing
cycle
In “operating” and
“programming” mode
used to increase or
decrease the time
In “operating” and
“programming” mode
used to increase or
decrease the
temperature.
When lit steady,
denotes fan is set to
ON. When flashing,
denotes fan is set to
pulse for the corres-
ponding product key
In “programming”
mode, used to set the
fan option for
corresponding
product key
In “operating” mode
the manual button is
used for on-the-fly
change of time or
temperature
Used to stop a
timeing or hold time
cycle
This hidden key is
used to enter
“programming mode”.
Programmable
Controller
Stores three operator
programmed
standard recipes plus
one manual override
recipe that can be
adjusted at any time.
Rotary Power/Fan
Control
Features four
positions for every
essential operation
Low Fan, High Fan,
Cool Down and Off.
Oven Light
Momentary
Switch
Optional, Manual
Stream Injection
The electronic timer
is preset at the
factory (operator
adjustable)
CO11-G, CO11-E, COCE
TSCO-E1 & TSDCO-E1