11
Programming the Oven Controller
The following steps are needed to enter and program each of the product keys. Please note that you
must follow each of the steps below for each product key.
NOTE
: The manual “M” key allows you to temporarily change the set temperature & time and will reset
to the original programming parameters after you are done cooking. This key is programmed the same
as keys 1, 2 & 3 except that programming mode does not have to be entered to do it. However, you can
still manually program the controller while in programming mode.
ACTION
RESULT
Press the product key you want to
program.
The corresponding LED will
light above the selected
product key.
Enter the programming mode by pressing
and holding the area between the START
and STOP keys until the light above the
product key starts flashing (approx. 3
seconds).
You have successfully entered
the programming mode.
To set the cooking time, press the up and
down arrow key to the right of the display.
The longer you press the key,
the faster the display will
change.
To set the cooking temperature, press the
up and down arrow key to the right of the
temperature display.
The longer you press the key,
the faster the display will
change.
To select the hold feature and set the
holding temperature, press and hold the
HOLD key, then use the up or down arrow
to the right of the temperature display to
select your holding temperature.
This will activate the holding
feature and set the holding
temperature. NOTE: The light
above the HOLD key will be on
if you have set the hold feature
correctly.
To select the fan operation, press the FAN
key until the mode you want is displayed.
1. The light above the FAN
key is on, the fan will be ON
when door is closed.
2. The light above the FAN
key is flashing, the fan will
ONLY be ON when the heat
goes ON.
To exit the programming mode, press the
space between the START and STOP
keys.
The product key light will be on
steady, and the program will be
saved.
PORTIONS OF THIS INSTRUCTION MANUAL PERTAINING TO THE CH-100 CONTROLLER ARE
REPRINTED WITH THE PERMISSION OF FOOD AUTOMATION-SERVICE TECHNIQUES, INC.
(FAST).
© 2001 Baker’s Pride Oven Co., Inc. All Rights Reserved.
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment. For Warranty
Service and/or Parts, this information is required.
Model Number
Serial Number
Date Purchased