13
Figure 1
Cleaning The Blower Wheel
E. SERVICING:
NOTE: THIS APPLIANCE MUST BE SERVICED BY AN AUTHORIZED SERVICE AGENT.
(1) Power supply to the unit must be disconnected before any service is performed.
(2) Most of the service on the unit can be performed from the front and/or control panel side.
(3) For proper servicing, access to the control panel side of the unit will be required.
(4) It will be necessary to have access to the back of the oven for service needs related to the
electric power supply.
(5) A system wiring diagram is provided in this manual and on the back of the service panel on the
right side of the oven.
(6) All servicing should be performed by a factory-authorized technician only.
(7) For proper maintenance and repairs, call the factory toll free (800-431-2745) for an authorized
service agency in your area.
WARNING:
RISK OF FIRE. When stacked two high maximum, use stacking kit !
part # E3771A only.
CAUTION:
This product, when stacked, has more than one power-supply!
connection point. Disconnect all power supplies before servicing.
Figure 2
OPEN RACK STAND ASSEMBLY INSTRUCTIONS: TSCO-E1 & TSDCO-E1
Assembly Instruction
1. Place undershelf (6) between legs & secure with 1 1/4-20
UNC screws (4), flat washers (3) & 2 locknuts (2). The holes
for mounting the wire racks should be toward the front of the
oven.
2. Place open rack supports (1) between legs & secure with
1/4-20 UNC screws (4), flat washers (3) & locknuts (2).
3. Slide wire rack supports (5) into position using the holes
in the undershelf (6) as a guide.
Item
P/N
Description
Quan
1
21818232
Support, Open Rack
2
2
Lock Nut 1/4-20
12
3
Washer, Flat 1/4”
12
4
Screw, 1/4-20 x 3/4”
12
5
Support, Wire Rack
2
6
21818220
Undershelf, Gas Oven
1