manualshive.com logo in svg

Standard Change-Makers CMP-20, Руководство по эксплуатации

Поделиться
Скачать
Standard Change-Makers CMP-20 Скачать руководство пользователя страница 39

Page 39 of 56

3.3 Printer Model: Citizen CMP-20 (Portable Audit Printer)

3.3.1 Loading Paper In The Printer

Automatic Loading With Power On or Off – There is no way to automatically load paper.

Manual Loading With Power On or Off – Press the large blue button, on the right, with the word PUSH 
on it to open the paper door. Lay the roll in with the paper coming up near the blade. Close the door 
with the end paper out of the printer. See photo below. 

3.3.2 Printer Troubleshooting

If the printer is not in an error mode, but will not print receipts or reports or the print out is the wrong 
text size, check the PRINTER SETTINGS menu for proper programming.

If paper is being ejected but not printed you should check to see if the paper is loaded upside down.

3.3.3 Printer Fault Conditions

When the printer is low on paper the red error led near the power button will light. When the paper is 
full it will be off.

Data Cable

Figure 3-11 (Citizen CMP-20)

Paper Specification
Thermal roll with the heat-sensitive side on the outside of the roll.
Paper Width: 58mm (2 ¼ inch)
Paper Thickness: 65

μ

m

External Roll Diameter: 48mm (1.9 inch)

Содержание CMP-20

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды