Standard Change-Makers CMP-20, Руководство по эксплуатации

Страница: 25 / 56

Page 25 of 56
Machine offline – Offline is sent if the EF+ Module has an error that prevents it from operating.
Accessing the Main Menu will put the machine offline. Online is sent when the error causing the
offline goes away.
Machine Sold Out – Machine Sold Out Active is sent if when the machine is sold out.
Dispenser Sold Out – Sent for each dispenser that goes sold out. This will include the location of
the dispenser. Bill recyclers are not included in this feature. The bill recycler can easily go in and out
of sold out and the alerts are useless.
Machine Error – Machine Error Active is sent when the machine is in error.
Dispenser Error – Sent for each dispenser that has an error. This will include the location of the
dispenser. This is not used with bill recyclers. There are too many false errors when the recycler
dispenses and then fills with the next customer.
Bill Acceptor Error
– Sent for each bill acceptor. This will include the location of the dispenser that
the bill acceptor is connected to. A bill acceptor error includes Jam and Bill Box Removed.
Door Status
– Sent when the door switch is opened and when it is closed. If the door is opened
within 5 minutes of closing it is seen as the same door open. A door switch kit can be connected at
J10.
Reset Pressed
– Sent if the reset button on the EF+ Module is pressed.
Power Returned – Sent when power returns to the EF+ Module.
Printer Error
– Sent when the printer runs out of paper.
Fast Vend – This will send an alert if the Bill Fast Vend levels are exceeded. A Bill Fast Vend error
will take the EF+ Module Out Of Service and will require a reset to remove the error. The Bill Fast
Vend levels can be changed in “CARD AND BILL FAST VEND SETTINGS”.
Stacker Full Alert – Sent if a stacker almost full alert occurs. These are set in the MACHINE
ALERT SETTINGS. Bill recyclers are not included in this feature.
Dispenser Alert – Sent if a dispenser alert occurs. The dispenser alert fill and alert levels are set in
the MACHINE ALERT SETTINGS.
Card System Communication
- "card system communication bad” is sent if communication is lost
to the card system. "card system communication good” is sent when communication returns.
1.19.3 Reports
The sending of reports default to NO. If you wish to receive a report press the YES button (number
9). The reports being sent are the same as the reports viewed and printed at the EF+ Module. It is
recommended that reports are sent to an email account and not a text account because the report will
overflow the character limitations of a text account.