© 2014 SPX CORPORATION
7
Form No. 1000773
Rev. 0 August 12, 2014
The motion control system is a PLC-based eight lift point (expandable) motion control
system which allows for accurate and reliable control of multiple hydraulic cylinders to accom
-
plish the lifting / lowering / pushing / etc. of almost any size load. The PLC software controls
valves
feeding each hydraulic cylinder in a way that will keep the load-movement synchronized within
the preset tolerance range, regardless of the actual load distribution within the hydraulic circuit.
• One hydraulic setup suits both single and double-acting cylinders under different pressure -
different load – in each circuit
NOTE:
When using single - acting cylinders, an overcenter, or other appropriate valve should
be used as safety in the event of hose break.
• Controlled cylinder movement in both directions: advance and retract
• Complete Motion Control System package consists of the following modules
Controller
Measuring System
Pump Unit
Valve System
Electrics/Electronics
DESCRIPTION CONTINUED
