© 2014 SPX CORPORATION
30
Form No. 1000773
Rev. 0 August 12, 2014
SET UP AND START UP CONTINUED
• At this point, the HMI (Human-Machine-
Interface) screen starts to power on, the
GREEN
power light and the
RED
Emergency E-stop light are activated.
• During the opening sequence, you will
see a blank BLUE screen which is
normal. This will change and the HMI
will soon switch over to the SPX page.
• At this point, the MCS controller is
running through its diagnostics. This
may take up to a minute or more. Once
completed, the program will switch to
the next page – the WARNING screen.
• This page requires you, the operator,
to read and understand the operator’s
manual before proceeding.
• The HMI is a touch screen. Once you
reach this screen, simply press the “I
AGREE” icon on the screen and the
screen will transition to the “HOME”
page. When you have read and
understand the operating instructions,
simply place your finger on the screen
and press the “
I AGREE
” icon
