© 2014 SPX CORPORATION
33
Form No. 1000773
Rev. 0 August 12, 2014
• Do the same for the OFF time.
Press the OFF time box and a
keypad will be highlighted on the
screen, enabling you to enter the
OFF time. Press enter to have the
time placed in the program.
• The last item on this page to enter is the
Quick Discharge “maximum operating
pressure”. By touching the pressure
box on the screen, you will get the
keypad that will allow you to enter the
quick discharge pressure. Press
ENTER
to have the value placed into
the program.
• Once the initial parameters are entered,
you will begin to set up each cylinder. To
do this, press
NEXT PAGE
as shown in
the picture. This will take you to
Cylinder #1 data entry page. By
continuing to press next you will be able
to turn on or off each of the individual
cylinder’s or lift points. This will enable
you to select 4 points, 5 points, 6 points
etc., up to 8 points of lift/lowering.
SET UP AND START UP CONTINUED
