© 2014 SPX CORPORATION
25
Form No. 1000773
Rev. 0 August 12, 2014
• Install the extend hoses from the
base of the cylinder to the female
quick disconnect - 25600-1 at each
lift motion point to be tested.
• Install the retract hoses from the rod
end of cylinder to the male quick
disconnect - 25599 at each lift
motion point to be tested.
SET UP AND START UP CONTINUED
• This section of the front panel shows
completed installation of hoses and
electrical cables. Begin to install the
hoses and cables as outlined in the
following steps.
