© 2009 SpinetiX S.A. All rights reserved.
34
The Pull mode can be used in bidirectional way to:
Automatically publish files to the HMP100.
Each time the HMP100 has been scheduled to update the content of its local
storage, it will connect to the specified server, check for changes, and download
all modified files.
Upload logs and previews to a remote WebDAV server.
The publish action of the Pull mode can be used with WebDAV server or with standard
HTTP servers. In this last case an XML files describing the content of the server must be
available. The Pull mode timings can be configured either directly from the HTTP interface
or using iCalendar files.
There are two ways to configure the Pull mode on a HMP100 unit:
Using the simple HTTP interface. This option is easy to configure, but has some
limitations. For example, it forces a daily project publishing at a specific timing.
Moreover, the options for uploading logs are limited.
Using iCalendar schedule files: This option gives you full control over the Pull
mode of the HMP100, but requires an external tool to create the iCalendar files
(
Mozilla Sunbird
for instance).
