HMP100 User Guide v2.1
17
5.
Make sure that the
Bonjour
client is installed on your PC.
Either install the Hyper Media Director (HMD) software from SpinetiX
(
http://www.spinetix.com/downloadHMD
), or download the
Bonjour installer
from
the Apple website.
6.
Validate
that the above steps are successful:
a.
Make sure that HMP100 has completed the booting phase: allow about 1
minute from the HMP100 power up. If you have connected the HMP100 to a
display you should see the default animated logo.
b.
Check that the LED is blinking green once per second. If this is not the case go
to the troubleshooting section at the end of this guide.
c.
Open a Web Browser (e.g. Internet Explorer, Firefox...) and type
http://spx-
hmp-[serial_number_of_the_hmp100].local/
in the location bar at the top.
The browser should connect to the HMP100 HTTP server and display the following page.
Congratulations. You can now explore the HTTP server of your HMP100 unit.
Through this web interface you can administrate the unit and in particular
configure its network properties and video resolutions.
