Speidel 41010-30, Официальное инструкционное руководство

Страница: 11 / 68

11 10
Gener
al inf
ormation
Technic
al data
Pr
epar
ation
Contr
ol
unit
Br
ewing
Notes
Maintenance
Appendix
Security
Note: During the production of the double jacket, slight bulges are created
on the inside of the jacket, which form the cavity for the water flow. These
are not transport damages or similar.
Drain tap
The drain tap facilitates cleaning and the draining of the trub during
filling. This is done by cleaning from above and at the same time drai-
ning the dirty water downwards into a drain or container via the hose
supplied. The drain is located in the middle of two bases and thus the
Braumeister PLUS can also be emptied completely by tilting it slightly.
After cleaning is complete, the Braumeister is still turned upside down to
dry out completely and to empty the pumps.
Circulation pump
The circulation pump can be switched on and off in manual mode. It is
important that the pump is vented after filling the liquid in manual mode
to ensure that the pump has full capacity and that it does not run dry and
may be damaged. This is done by switching the pump on and off several
times with water filled in (until no more air bubbles escape and hardly
any pump noises can be heard). When in automatic mode, the device will
do this on its own. In the automatic brewing process, the pump switches
off automatically in case of too high temperatures and only switches on
again in a colder state. The power of the pump can be adjusted with the
rotary potentiometer. The power recommended by Speidel is marked by
an arrow.
6