Speidel 41010-30, Официальное инструкционное руководство

Страница: 17 / 68

17 16
Gener
al inf
ormation
Technic
al data
Pr
epar
ation
Contr
ol
unit
Br
ewing
Notes
Maintenance
Appendix
Security
Children should be supervised to ensure that they are kept away from
the device and do not play with it.
3.2 Special safety instructions
The container, lid and attachments become very hot. At the end of the
brewing process the kettle contains boiling beer wort. Please observe
the installation instructions. Never move the Braumeister PLUS while
it is hot. When working on and with the Braumeister PLUS, you should
always use pot holders or gloves.
Danger of burns!
When lifting the lid, make sure that the water condensed on the
underside runs back into the container. Hold the lid at an appropriate
angle over the container.
Risk of scalding!
The Braumeister PLUS consists almost entirely of stainless steel
(electrically conductive). For this reason it may only be operated via a
30 mA residual current circuit breaker. Usually such an RCD is already
present in the house installation.
Danger of electric shock!
Only ever carry out cleaning work on the Braumeister PLUS with the plug
disconnected (disconnect from the power supply). Do not spray the unit
or spray into the electrical components.
Danger of electric shock!
Important: To operate the control unit, it is essential to lock the plug
connections on the rear of the unit. There is a risk of overheating when
operating with unlocked plug connections.
Fire hazard!
For insulation, please use the “thermal sleeve” accessory offered for this
purpose. If you use your own insulation, please ensure that the electro-
nics and the lower area of the Braumeister PLUS remain well ventilated,
otherwise heat accumulation and damage to the control unit may occur.
Before each use the pump must be vented to prevent it from running
dry. The venting process takes place by itself in automatic mode. In
manual mode, switch the pump on and off several times until no more
air bubbles escape.