Speco D24GS, Инструкция по эксплуатации

Страница: 48 / 110

Operation Instruction
38
Highlight the box under the
Actions and press the button. The DVR can be set to react to text input. Text input
can be associated with cameras, trigger an Alarm-Out connector, sound the DVR’s internal buzzer, notify a number
of different devices, move PTZ cameras to preset positions, and/or display a camera on a SPOT monitor.
NOTE: The text-in information might not be displayed on the image when the recording speed is set to less than
1 ips.
Network
Highlight
Network
and press the
button, and the Network setup screen appears. (Network Devices Only)
Figure 24 : Event – Network setup screen.
Highlighting the box under the
Event
and pressing the
button displays events that occurred on the network device
channel that you selected.
NOTE: Displaying events is supported when the network device is networked with the DVR.
Highlighting the box under the Use and pressing the
button turns each selected event On and Off.
Highlighting the box under the Actions and pressing the button selects how the DVR reacts to network devices
events. The network devices events can be associated with cameras, trigger an Alarm-Out connector, sound the DVR’s
internal buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or display associated
local cameras on a SPOT monitor.
NOTE: For the event detection and action to work, the event-related settings for network devices should set
properly.
Network Setup
General
Highlight
General and press the
button, and the General
setup screen displays.