Speco D24GS, Инструкция по эксплуатации

Страница: 85 / 110

Digital Video Recorder
75
You can also toggle On and Off self-diagnostic System Events as part of your search. The choices are:
 Panic Record
 Check Recording
 Check Alarm-In
 Disk Almost Full
 Disk Bad
 Disk Temperature
 Disk S.M.A.R.T.
 Fan Error
 eSATA/iSCSI Disconnected
Once you set your desired search conditions, highlight
Search
and press the button to display the search results in
the Event Log Search screen. Selecting Cancel exits the screen without saving the changes.
Record Table Search
< Compact View >
< Standard View >
< Expanded View >
Figure 51 : Record Table Search screen.
Recording information about video images currently displayed on the screen displays on the recording status bar. A
grey vertical line indicates the current search position. To search specific video, move the vertical line by using the
Left
or
Right
arrow buttons on the front panel or by clicking the mouse on the desired segment.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range. In this case, the overlapping time range in the record table
will be separated by a yellow vertical line.
NOTE: The recorded data in the time range located after the white vertical line is the latest.