Speco D24GS, Инструкция по эксплуатации

Страница: 42 / 110

Operation Instruction
32
You can turn individual cameras On or Off for pre-event recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from
Very High, High , Standard and Basic , and image resolution
can be selectable from Very High (D1) , High (2CIF) and Standard (CIF) .
NOTE: Depending on network conditions, the ips, quality and resolution for the network video transmitter (ips
for the network camera) you set may not be attainable.
You can set the amount of time to record prior to the event by adjusting the Dwell . You can set the Dwell from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum ips can be set.
NOTE: Depending on the ips, quality and resolution of recorded video, the pre-event Dwell you set may not be
attainable. (Network Camera Only)
When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the time
settings.
Archive
Highlight
Archive and press the
button, and the
Archive setup screen appears.
Figure 17 : Record – Archive setup screen.
Highlight Archive On and press the button to toggle between On and Off.
NOTE: If you have not set up a storage device for archiving, a message appears notifying you of this.
Select the Days and Time Range you want archived.
You can accept the Archive Data Range by leaving the default checkmarks in the Last Archived and Continue boxes.
If you wish to enter specific times and dates in From and To , toggle the checkmarks Off and then enter the time and
date.
Highlight
Recycle
and press the button to toggle between On and Off. When Recycle is On and the storage device
is full, the newest archived video data will overwrite the oldest archived data. When Recycle is Off, the DVR will stop
archiving video data until more space is made available.
CAUTION: When the Recycle is On, changing the start date and time for archiving will delete all
archived data after the changed start date and time.