Atlas™ Autotouch 8T, 15T and 25T Hydraulic Presses
27
Place the sample in the pressing area (
6
) on the piston pressing face
(
7
). The maximum height of a sample that can be installed into the
pressing area is 155mm.
Note:
It is essential to always place the sample in the centre of the
piston pressing face (7) for safe loading.
Rotate the lead screw (
8
) via the handle (
9
) to raise or lower the top
bolster anvil pressing face (
10
) until there is a gap of no more than 2 to
3mm between it and the top surface of the sample to be compressed.
Now close the front safety guard (
5
) to its down/safe position. The
“
Close Guard
” message will disappear from the display. The press will
revert to the (
MOS
) Display Screen condition as seen from an initial
switch on at page 25.
Applying a Load with the Atlas™ Autotouch 8T/15T/25T
Press
Once the sample is correctly positioned and the safety guard (
5
) has
been closed, the “
Pump up to
” load value as shown for the (
MOS
) can
be applied.
If the “
Pump up to
” load value that is being shown as the first segment
(
S1
) of the loaded program to run (in this instance (
PZ
) at 3 Tons), it
can be applied simply by pressing the start (apply load) button (
11
).
However, if the “
Pump up to
” load value being displayed
is to be
changed
, then the
Increase Load
operation symbol box on the green
background bar area of the Display Screen (
4
) must be pressed.
The (
MOS
) Display Screen (
4
) changes to show a Display Screen
environment for the setting of a load to apply, which has a slide scale
load indicator with the lower (left side green box) and upper (right side
green box) load range limits that can be set for the press and a vertical
line cursor position on the slide scale corresponding to the current
“
Pump up to
” load value set on the loaded (
PZ
) program.
Note:
The range limits are 1.0 to 8.0 tons for the 8T, 2.0 to 15.0 tons
for the 15T and 3.0 to 25.0 tons for the 25T (as shown).
Содержание Atlas Power 15Ton
