Specac Atlas Power 15Ton, Руководство пользователя

Страница: 44 / 84

User Manual
42
6. Display Screens – Operation, Options,
Programming, Directory and Editing
The Different Display Screen Environments
1) Main Operation Screen ( MOS )
As stated from Section 5) (Operation Of The Atlas™ Auto 8T/15T/25T
Press), when the Atlas™ Autotouch 8T/15T/25T press is switched on
at the mains, power to the press will also be indicated by illumination of
the Electronic Display (
4 ). From start up the display will show its
software version number and then default to the Main Operation
Screen (
MOS ).
The (
MOS
) is the Display Screen that is shown whenever the Atlas™
Autotouch 8T/15T/25T press is running any pressing operation or pre-
selected program. From initial powering up, the Simple Operation (
PZ )
program will be loaded to show in the ( MOS ) environment to be used
in running the press.
Note: The ( PZ ) program has been used as a “Quickstart Guide” in
Section 5) for operation of the Atlas™ Autotouch 8T/15T/25T
press to show the various stages and display screen messages
found within the (
MOS ) environment when a program is running.
The (
PZ ) program enables the user to select a set load from various
Units
of measurement (see Options (
Opt
) Screen – page 49) from the
load range of the press to apply to a sample - usually a sample to
press/compact is within an evacuable pellet die assembly that would
be placed in the press.
The selected load Units value is applied from
the press by pushing the start button ( 11 ). The press will maintain the
load selected on the ( PZ ) program with an auto “top up” function until
the stop button ( 12 ) is pressed.
From the (
MOS ) access is gained to the other Display Screen
environments by touching the representative symbols in their