Specac Atlas Power 15Ton, Руководство пользователя, Страница: 14 / 84

User Manual
12
Electrical Safety
•
Check that the input voltage (230v, 220v, 110v or 100v) and
frequency 50Hz or 60Hz) printed on the appliance label at the back of
your press is compatible with your AC mains voltage.
•
The electrical supply connection to the power plug must be earthed.
The protective action earth contact must not be negated by use of an
extension cable without a protective conductor.
•
Any interruption of the protective conductor inside or outside the
press or disconnection of the protective earth terminal is likely to make
the apparatus dangerous
. Intentional interruption is prohibited.
•
If the press is to be energised via an external autotransformer for
voltage reduction, make sure its common terminal is connected to the
neutral (earth pole) of the power supply.
•
ONLY suitably rated mains leads (power cables) should be used with
this product.
•
When the press is connected to the mains power supply, terminals
may be live and opening of covers or removal of parts (except those to
which access can be gained by hand) is likely to expose live parts. To
avoid the risk of electrocution, disconnect the mains power supply
BEFORE removing any covers to the electrical components or motor
assembly.
•
Make sure that only fuses with the required current rating and
specified type are used for replacement. The use of make-shift fuses
and short-circuiting of fuse holders are prohibited.
•
When the power is switched off from the mains supply, wait one
minute before disconnecting the mains input cable, as capacitors can
store charge and give severe shock.