TRAK Machine Tools
Southwestern Industries, Inc.
The ProtoTRAK DXF Converter Operating Manual
36
Figure 5.9.1 Select Hide Line and click on the original line.
Next, we click on the short side of the line and it is hidden.
Figure 5.9.2 Click on the short side of the line and it is hidden.
Now, click on the Undo button to restore the short side of the line because we will need it later to
program that corner with a different tool. Now the point of intersection has been established and
we can use the cycle function.
Note:
Use the Hide Line function to trim the line we added before programming the cycle
events.
Figure 5.9.3 The new line segment has been properly created.
