TRAK Machine Tools
Southwestern Industries, Inc.
The ProtoTRAK DXF Converter Operating Manual
24
Figure 4.7.4.1 Use the Add Line feature to save the material for machining in a separate
operation.
When you click on the horizontal line to the left of the groove the new line is added.
Figure 4.7.4.2 The new line is inserted.
The vertical lines at each radius make it difficult to create a tool path, and are not
needed to create a part profile. Use the Hide Line feature to get rid of the lines.
Figure 4.7.4.3 Use the Hide Line feature to eliminate drawing lines that are not needed.
4.8 Converting Geometry into a ProtoTRAK Program
After you have edited and simplified the geometry, programming is just a matter of selecting the
events. With the ProtoTRAK DXF Converter, you have total control over how the part is made -
just like regular ProtoTRAK programming.
The basic steps are:
1.
Pick the event type.
2.
Pick the geometry on the drawing. This will load the dimensions from the drawing into the
event type you choose.
3.
Fill in the rest of the prompts to complete the event.
