South Bend Tools SB1007, Руководство пользователя

Страница: 7 / 84

South Bend Tools
For Machines Mfd. Since 12/21 Model SB1007
-5-
I N T R O D U C T I O N
Serious personal injury could occur if you
connect the lathe to power before completing
the setup process. DO NOT connect power
until instructed to do so later in this manual.
Carriage
S . Tailstock Offset Screw (1 of 2):
Adjusts
tailstock offset left or right from spindle
centerline.
T . Quill:
Moves toward or away from spindle.
Holds centers or tooling.
U . Quill Lock Lever:
Secures quill in position.
V . Tailstock Lock Lever: Secures tailstock in
position along bedway.
W . Quill Handwheel:
Moves quill toward or
away from spindle.
L. Half Nut Lever:
Engages/disengages half nut
for threading operations.
M. Carriage Handwheel: Moves carriage along
bed.
N. Cross Slide Handwheel:
Moves cross slide
toward and away from workpiece.
O. 4-Way Tool Post: Mounts up to four cutting
tools at once, which can be individually
indexed to workpiece.
P. Compound Rest Handwheel: Moves tool
toward and away from workpiece at preset
angle of compound rest.
Q . Thread Dial: Dial indicates when to engage
half nut during inch threading operations.
Chart on headstock (not shown) indicates on
which thread dial reading to engage half nut
for specific thread pitches.
R. Feed Selection Lever: Selects carriage or
cross slide for power feed operations.
Tailstock
Figure Figure 6. Tailstock controls. Tailstock controls.
S S
TT
U U
W W
V V
Figure Figure 5. Carriage controls. Carriage controls.
Q Q
R R
LL
M M
N N
O O
P P