South Bend Tools SB1007, Руководство пользователя

Страница: 36 / 84

-34-
For Machines Mfd. Since 12/21
South Bend Tools
Model SB1007
O P E R A T I O N
Installing Tooling
This tailstock uses a quill with an MT#3 taper
that accepts tapered arbors like those shown in
Figures 36–37. Because the quill is flared at the
back, it is capable of taking tools with or without
tangs. Other tooling can be used if the potential
load will not exceed the strength of the tapered
fit. This includes smaller drill chucks, drill bits,
and centers.
If the arbor has an open hole in the end, a
screw can be threaded into the end of the tool
to provide a solid surface for the quill pin to
push against when the quill is retracted for tool
removal.
Figure Figure 36. Types of tapered arbors and tooling. Types of tapered arbors and tooling.
Open Open
End End
Solid Solid
End End
Screw Screw
End End
Tang Tang
End End
Figure Figure 37. Example photos of MT#3 tools being . Example photos of MT#3 tools being
inserted into tailstock. inserted into tailstock.
Graduated Dial on Handwheel
Increments ....................................0.002" (0.05mm)
One Full Revolution ...........................0.8" (2.0mm)
Increments on Quill Scale
Inch .................................0–3
1
⁄
8
" in
1
⁄
16
" Increments
Metric .......................0–80mm in 1mm Increments
Positioning Tailstock
1. Pull tailstock lock handle backward (away
from spindle) to unlock tailstock from
bedway.
2. Slide tailstock to desired position.
3. Push tailstock lock handle forward (toward
spindle) to lock tailstock against bedway.
Positioning Quill
1. Move quill lock lever toward spindle to
unlock quill.
2. Turn quill handwheel clockwise to move quill
toward spindle or counterclockwise to move
it away from it.
3. Move lock lever away from spindle to secure
quill in place.