South Bend Tools SB1007, Руководство пользователя

Страница: 23 / 84

South Bend Tools
For Machines Mfd. Since 12/21 Model SB1007
-21-
P R E P A R A T I O N
7. Open end gear cover and feed lifting strap
through cavity of headstock and behind
chuck (see Figure 15), then attach to
forklift.
When lifting lathe with slings, load will be top
heavy. Take extra care to keep load balanced
vertically and only lift lathe far enough to
remove shipping pallet.
Figure Figure 15. Lifting strap properly positioned around . Lifting strap properly positioned around
headstock. headstock.
Note:
See Figure 16 for an example photo of
lifting the lathe with the straps positioned as
instructed above.
Figure Figure 16. Example photo of lifting lathe with straps . Example photo of lifting lathe with straps
properly positioned. properly positioned.
8. With two other people to help keep lathe
from swaying, raise it a couple of inches.
— If load is not well balanced, or if you
see any other difficulties with lifting
equipment, immediately lower lathe
to pallet again. Resolve any lifting or
balancing issues, then repeat this step.
9.
Lift lathe enough to clear shipping pallet
and any small floor obstacles, then move it to
prepared location and lower it into place.