◇
30
The external file operation interface is indicated:
Figure 4.2.4.2 External file operation interface
Interface Description:
1
I: internal file. Storage area divided inside the instrument, save or call the test file
2
E: External U disk storage file. U disk to store, save or call test files, enable to use the current
settings file on other instruments conveniently.
3
Internal copy to E:, The U disk is saved to the currently opened U disk directory by default, The
default state is the root directory.
Note:
1.
Because the instrument system is simple, USB flash drive capacity should not exceed
8G; Store as few files or directories as possible, to avoid instrument reading failure.
2.
Files
of different program versions may not be compatible, if the test conditions of the
called file incomplete display, please
restore the factory settings
of the instrument,
re-
edit
the new test file.
4.3
Test project interface and parameter description
This section describes the test function parameters of the setting interface and their meanings, to guide
customers in setting relevant parameters.
Move the cursor to the test step, press "F1~F6" to modify the test file.
4.3.1
AC withstanding voltage test parameter setting
The setting interface is as follows:
