Item name
Description
Range or choices (under line: Ini-
tial value)
Primary Port
Used to set the port number of the RDS to be con-
nected.
This item is used when RDS Discovery is disabled.
0 to 65535
Secondary IP Ad-
dress
Used to set the address of the RDS to be connected.
This item is used when RDS Discovery is disabled
and connection to Primary RDS fails.
0.0.0.0 to 255.255.255.255
Secondary Port
Used to set the port number of the RDS to be con-
nected.
This item is used when RDS Discovery is disabled
and connection to Primary RDS fails.
0 to 65535
Tip
When RDS Discovery is enabled, either uDNS or mDNS automatic discovery function works depending on situations.
• uDNS
This function can automatically discover arbitrary RDS by using the DHCP and DNS functions together.
When all of the following conditions are met, automatic discovery by uDNS is enabled.
- DHCP of this board is enabled.
- DNS information is given from the DHCP server.
- RDS information is provided from the DNS server.
• mDNS
This function automatically discovers RDS that belongs to the network with the same segment as the target board.
If the conditions foe enabling uDNS are not met, the target board tries automatic discovery by the mDNS function.
Device Connection Management (IS-05)
This function makes the settings for device connection management. Clicking [Apply] immediately apply the settings.
Item name
Description
Range or choices (under line: Ini-
tial value)
Start Up Mode
Used to set behavior immediately after the board is rebooted.
Stop: ST2110 transmission is suspended until the IS-05 control
signal is sent from the external device.
Resume: The ST2110 transmission state before startup is im-
mediately reproduced.
Stop
Resume
Note
Before using Resume Mode, check the system configuration to see if any problem occurs.
If the system configuration is changed during Resume Mode or if the XVS system is used in another system, a problem
may occur due to a duplicate multicast address or a network bandwidth overflow.
Status
This function displays board status related to NMOS.
Item name
Description
Range or choices (under line: Ini-
tial value)
DNS IP Address
When the DHCP function of the board is enabled and appropriate
DNS information is given from the DHCP server, the DNS server
address used when RDS Discovery is enabled is displayed.
0.0.0.0 to 255.255.255.255
DNS Server Do-
main
When all of the following conditions are met, the DNS domain
name for RDS recovery used when RDS Discovery is enabled
is displayed.
• DHCP of this board is enabled.
• DNS information is given from the DHCP server.
• RDS information is provided from the DNS server.
Up to 64 ASCII code characters
Continued
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
1-36