1-14. IP Video Interface (ST2110) Boards
This section describes the web menu of the firmware of the following IP video interface boards.
• XKS-C8111
• XKS-C8166
• XKS-C9111
• XKS-C9121
1-14-1. Displaying Web Menu
Equipment required
• Personal computer (PC): A PC that can be connected to the IP Video Interface board through a network and supports
the following recommended web browsers.
Recommended web browsers
- Google Chrome (64bit) 72 (Verified version) or later
Procedure
1.
Check the IP address of the target device by using XVS MENU (7311.2) or LSM (AV Router > Settings > Device).
2.
Run the web browser on the PC.
3.
Type “https://(IP address of update target device)”on the address bar, and then press the Enter key.
4.
On the displayed screen, enter ID and password.
Tip
• The following table shows the initial account (factory default).
Account Type
User ID
Password
Administrator
admin
nmidev123
Operator
operator
nmidev123
• At the time of the first access, changing the account information is required.
For how to change the account information at subsequent accesses, refer to
• The following table shows functional restrictions for the web menu due to differences in Account Type.
Function
Account Type
Administrator
Operator
Firmware Update
〇
—
Changing the user ID and password of all users (administrator and operator)
〇
—
Changing only the user ID and password of operator authority
〇
〇
Downloading the information file
〇
—
Uploading the installation key
〇
—
Changing SNMP settings
〇
〇
Changing NMOS settings
〇
〇
Browsing and downloading log data (access to /logview.cgi?html)
〇
〇
Rebooting boards
〇
—
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
1-27