![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494139.webp)
139
Maintenance Menu
Chap
te
r 7
Men
u
s
a) A jumbo frame is a frame larger than the maximum 1514 bytes (not
including FCS) of the standard Ethernet frame. Jumbo frames make it
possible to deliver larger payloads per packet. Since fewer packets need to
be routed, packet processing overhead is lower and network throughput is
potentially improved. (Note that this item is enabled only when LINK
SPEED is set to “1000Mbps”. For it to work, all other devices that handle
packets on the network must also support jumbo frames.)
Maintenance menu operations
This section describes the indications in the maintenance
menu and how to change the settings.
To display the maintenance menu
Holding down the PAGE/HOME button and the SHIFT
button, press the MENU button.
M52: SUBNET MASK PRESET
Set the subnet mask.
255.255.255.000
Notes
• Subnet mask cannot be set when DHCP is set to “ENABLE”.
• To check the automatically acquired subnet mask, close the maintenance menu and then
open it again.
M53: DEFAULT GATEWAY
PRESET
Set the address of the default gateway.
000.000.000.000
Notes
• The address of the default gateway cannot be set when DHCP is set to “ENABLE”.
• To check the automatically acquired address of the default gateway, close the maintenance
menu and then open it again.
M54: LINK SPEED
Set the communications speed.
AUTO, 10Mbps, 100Mbps, 1000Mbps
M55: DUPLEX
Set the communications method.
AUTO, Full Duplex, Half Duplex
For how to set the communication method, see “To change network settings” (page 140).
M56: JUMBO FRAME
a)
Set the size of jumbo frames.
9014, 4088, OFF (1514)
Note
This value does not include the 4 bytes of the FCS (Frame Check Sequence).
M57: DNS1 PRESET
Set the address of DNS server 1.
000.000.000.000
Notes
• The address of DNS server 1 cannot be set when DHCP is set to “ENABLE”.
• To check the automatically acquired address of DNS server 1, close the maintenance
menu and then open it again.
M58: DNS2 PRESET
Set the address of DNS server 2.
000.000.000.000
Notes
• The address of DNS server 2 cannot be set when DHCP is set to “ENABLE”.
• To check the automatically acquired address of DNS server 2, close the maintenance
menu and then open it again.
M59: UPnP
Select whether to enable the UPnP (universal plug and play) function.
DISABLE:
Disable the UPnP function.
ENABLE:
Enable the UPnP function.
M5F: RESET NET CONFIG
Reset network settings to the factory defaults.
SAVE function button (F5):
Reset.
MENU button:
Return to the next highest menu level without executing the reset.
M5: NETWORK: Items relating to network settings
Item
Setting
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...