![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494053.webp)
53
Recording
Cha
p
te
r 4
Re
c
o
rdin
g
a
nd Pla
y
b
a
c
k
• Make a network or FAM connection
• Eject the disc
• Change the recording format (change the setting of setup
menu item 031 RECORDING FORMAT)
• Power the unit off
To turn the function off
Set setup menu item 150 REC MODE to “normal”.
Using the Live Logging function
Live Logging allows you to transfer planning metadata and
proxy AV data between this unit and a computer as you are
recording.
Live Logging has the following two operation modes.
To record with the Live Logging function
enabled
Connect this unit and a computer to a network
, and then set setup menu item 258 LIVE
LOGGING MODE to one of the following.
live mode:
Live mode
live view mode:
Live View mode
• In Live View mode, the run mode is always Free Run,
regardless of the setting of RUN MODE on page P5 TC
of the function menu. It is not possible to preset the
timecode to be recorded.
• The Disc Exchange Cache function and Clip Continuous
Rec function cannot be enabled in Live View mode.
• FAM or FTP connections cannot be established during a
Live View mode connection. Live view mode
connections cannot be established during a FAM or FTP
connection.
Handling of discs when recording
does not end normally (salvage
functions)
Recording processing does not end normally if, for
example, the POWER switch on the rear panel is turned off
during recording, or if the power cord is disconnected
during recording. Because the file system is not updated,
video and audio data recorded in real time is not
recognized as files and clip contents recorded up to that
point are lost.
However, this unit has salvage functions which can hold
losses to the minimum by reconstructing clips on such
discs. There is a quick salvage function which executes
automatically and a full salvage function which you can
execute as required.
Quick salvage:
Clips are reconstructed on the basis of
backup data stored in nonvolatile memory and
markers recorded on the disc. Processing time is about
5 seconds.
Quick salvage executes automatically if the unit is
powered on with a disc still loaded after recording
was interrupted by power off.
Full salvage:
Clips are reconstructed on the basis of
markers recorded on the disc. Nonvolatile memory
cannot be used, so processing takes longer than for a
quick salvage (about 30 seconds, although it depends
on the state of the disc).
You are prompted to execute a full salvage whenever
you insert a disc that was removed manually from a
powered off device after interruption of recording by
power off.
Note that no recorded clip contents are lost when the on/
standby button on the front panel is set to standby during
recording, because the unit does not enter standby mode
until after the end of recording processing.
• Even after recording finishes, do not set the POWER
switch on the rear panel to off until the ACCESS
indicator has gone out.
• These functions salvage as much recorded material as
possible after an unforeseen accident, but 100%
restoration cannot be guaranteed.
• When recording on this unit does not end successfully
for a disc and you use another XDCAM system other
than the PDW-HD1200 to perform a full salvage of the
disc, use the PDW-F1600, PDW-HD1500, PDW-HR1,
PDW-F800, PDW-700, PDW-740, or PDW-680 for the
other system.
• The following alarm message
appear when you insert a disc:
“DISC CANNOT BE RECORDED. FORMAT DISC
OR CONTACT SERVICE TO RUN CLIP SALVAGE
PROGRAM. (XXXX)”
This message means that recording on that disc did not
end normally. The “XXXX” in the message is a code for
XDCAM devices that can salvage the disc. Refer to the
following table and use one of the indicated devices to
salvage the disc.
Operation mode
Main functions as seen from this
unit
Live
• Receive planning metadata
• Send clip metadata recorded on the
basis of planning metadata
• Write edited clip metadata back to
disc
Live View
• Same functions as above
• Send proxy AV data
Notes
Notes
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...