![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494120.webp)
120
Setup Menu
Chapt
er
7
Men
us
3
Use the PUSH SET(S.SEL) knob or the +/– function
button (F3 or F4) to change the setting.
Turning the PUSH SET(S.SEL) knob while holding
down the SHIFT button increases the increment of
adjustment.
4
To change other settings, press the PUSH SET(S.SEL)
knob or the SELECT function button (F2) to return to
the previous screen, then repeat steps
1
to
3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message “ABORT !” appears on the video
monitor display and “Abort !” in the time data display
area for about 0.5 seconds, and the system exits the
menus. To change more than one setting, be sure to press
the SAVE function button (F5) after making the settings.
To return menu settings to their factory
default settings
After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
To return a particular setting to its factory default
setting
In the screen that selects the setting of that item, press the
RESET/RETURN button.
For example, proceed as follows to return the 005
DISPLAY INFORMATION SELECT item to its default
setting. This assumes that the setting has been changed
from the factory default “time data & status” in step
3
of
the procedure in
“To change the settings of menu items”
.
1
Press the RESET/RETURN button.
“time data & status” (factory default setting) is
selected.
2
Press the SAVE function button (F5).
The setting returned to its factory default is saved in
memory as the current setting.
To return all settings to their factory default
settings
1
Press the MENU button to display the setup menu.
2
Press the RESET/RETURN button.
A message appears, to confirm whether you wish to
return all settings to their factory default settings.
3
Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time
data display area, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory. If you power off
the unit while settings are being saved, settings may
not be correctly returned to their factory default
settings. Wait until the saving is completed before
powering off the unit.
To abandon the resetting operation
Instead of pressing the SAVE function button (F5),
press the RESET/RETURN button. The display
returns to the top level of the setup menu, leaving the
settings unchanged.
To customize the display of setup menu
items
You can select the menu items displayed in the setup
menu.
1
Set maintenance menu item M41: CUSTOMIZE to
“ENABLE”.
See page 139 for information about how to use the
maintenance menu.
Notes
I T E M - 0 0 5
D I S P L A Y I N F O R M A T I O N
S E L E C T
t i m e d a t a & C N T
Current setting
Message on the video
monitor display
Initialize all items to factory
preset values?
Message in the time data
display area
Init setup?
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...