![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494128.webp)
128
Setup Menu
Chapt
er
7
Men
us
Menu items in the 700s, relating to video control
Item number
Item name
Settings
703
BLANK LINE SELECT
Switch blanking of the video output signal on or off for individual lines in
the vertical blanking interval.
Sub-Item
The Y/C signal and odd/even fields are blanked simultaneously.
ALL LINE
- - -
: Specify the blanking for each line separately.
blnk (blank)
: Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu)
: Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
In 59.94i mode LINE 12 ...
LINE 19
Specify blanking for lines 12 to 19.
blnk (blank)
: Carry out blanking.
thru (throu)
: Switch off blanking.
LINE 20
Specify blanking for line 20.
blnk (blank)
: Carry out blanking.
half
: Carry out half-blanking.
thru (throu)
: Switch off blanking.
In 50i mode
LINE 9 ...
LINE 22
Specify blanking for lines 9 to 22.
blnk (blank)
: Carry out blanking.
thru (throu)
: Switch off blanking.
LINE 23
Specify blanking for line 23.
half
: Carry out half-blanking.
thru (throu)
: Switch off blanking.
705
EDGE SUBCARRIER REDUCER
MODE
Select whether to enable the edge subcarrier reducer (ESR).
on
: Enable.
off
: Do not enable.
When playing back a composite signal, set this to “on”.
707
FORCED VERTICAL
INTERPOLATION OFF
The “Y-add” function is normally switched on automatically during jog or
variable speed playback. This item selects whether to force the “Y-add”
function off.
auto
: Automatically switch the “Y-add” function on.
off (forced YADD off)
: Force the “Y-add” function off.
The “Y-add” function is off while a disc image is displayed in stop mode
(menu item 108 AUTO EE SELECT is “off”).
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
710
INTERNAL VIDEO SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator.
When V INPUT on the P1 VIDEO page of the function menu is set to
“SG”, the internal test signal generator operates to output the selected
test signal. This signal can also be recorded.
CB75 (75% Color Bars):
75% color bar signal
CB100 (100% Color Bars):
100% color bar signal
MLTBS (Multi Burst):
Multi-burst signal
10STP (10 steps):
10-step signal
PLSBR (Pulse and Bar):
Pulse and bar signal
RAMP (Ramp):
Ramp signal
BLACK (Black):
Black signal
ARBCB (ARIB Color Bars):
ARIB color bar signal, modify width, 100%
Note
ARIB CB cannot be specified when SD recording is selected. If ARIB CB
is selected, the selection is changed to CB75 (75% Color Bars).
713
VIDEO SETUP REFERENCE
Set the video setup amount to be added to the composite output signal (in
59.94i mode only).
Sub-item
OUTPUT
LEVEL
In 59.94i mode
Add the setup level selected by this item to the output signal.
0.0
%,
7.5
%
715
VIDEO GAIN CONTROL
Adjust the video output level.
–
2048 to 0 to 848
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...