![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494117.webp)
117
Setup Menu
Chap
te
r 7
Men
u
s
016
ALARM DISPLAY
Select whether to display alarm messages.
off
: Do not display alarm messages. (However, certain important alarms are
displayed.)
limit (on (limited))
: Display only a minimum number of alarm messages.
on
: Display all alarm messages.
For details about alarm message display conditions, see “Alarms”
(page 147).
017
SUB STATUS DISPLAY SELECT Determine the kind of sub status information to be output from the
COMPOSITE OUTPUT 2 (SUPER) connector, SDSDI OUTPUT 2 (SUPER)
connector, HDSDI OUTPUT 2 (SUPER) connector, or HDMI OUTconnector.
off
: Do not output sub status information.
rmain (disc remain)
: Available disc space (unit: minute)
clip (clip no)
: Order of playback of the selected clip/total number of clips
pbr (playback remain)
: The remaining playback time of the selected clip
from the current playback position (hours:minutes:seconds:frames).
name (clip name/title)
: The name of the clip that is currently being recorded
or played, as set in Settings >Display Title of the Disc Menu (standard
name, user-defined name, title, or planning metadata name)
The following characters can be displayed as clip names in this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, , (comma), -, .
(period), /, : (colon), ; (semicolon), <, =, >, ?, @, [, ], ^, _, {, |, }, ~
• Space
Note
When menu item 005 is set to “off”, sub status information is not displayed
when this item is set to anything other than “off”.
024
MENU CHARACTER TYPE
Determine the type of characters in menu text output from the COMPOSITE
OUTPUT 2 (SUPER) connector, SDSDI OUTPUT 2 (SUPER) connector,
HDSDI OUTPUT 2 (SUPER) connector, or HDMI OUT connector for
superimposed display on the monitor.
white
: White letters on a black background.
black
: Black letters on a white background.
W/out
: White letters with black outline.
B/out
: Black letters with white outline.
Set this item by selecting the required type while viewing the monitor.
028
HD CHARACTER
Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off:
Do not superimpose.
f-key (function key select):
Follow the function menu setting.
029
STORED OWNERSHIP
Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off
: Do not enable.
on
: Enable.
See “Using UMID Data” (page 160) for more information about UMID.
031
RECORDING FORMAT
Set the recording format.
HD422:
HD422
420HQ (HD420HQ):
HD420HQ
420SP (HD420SP):
HD420SP
IMX50 (IMX50Mbps):
MPEG IMX 50 Mbps
IMX40 (IMX40Mbps):
MPEG IMX 40 Mbps
IMX30 (IMX30Mbps):
MPEG IMX 30 Mbps
DVCAM:
DVCAM
033
BATTERY END VOLTAGE
Sets the voltage to shut down the unit in the battery operation. The battery
near end indicator flashes at +0.7 V of the set voltage.
10.5V to 13.5V:
10.5 V to 13.5 V in 0.5 V unit.
Item number Item name
Settings
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...