![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494154.webp)
154
Troubleshooting
App
end
ix
Alarms relating to audio and video signals
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
“on”.
Alarms relating to sensors and drives
Alarms related to system frequency and recording format
The following alarms are displayed only when setup menu
item 016 ALARM DISPLAY is set to “on” or “limit”.
Syntax Error!
This appears when loading of planning metadata fails because of a syntax error. Correct the
syntax error and try loading the metadata again.
Irregular Disc is Used.
Use Professional Disc.
This appears when the unit is unable to record or play the inserted disc.
This unit can record and play Professional Discs. Insert a Professional Disc.
The Disc Write Protect TAB
is set to Save.
This appears when an attempt is made to format a write-protected disc.
Try formatting the disc after moving the write protect tab away from the Save position.
The REC Inhibit Mode is
Selected.
Check Function Menu.
This appears when an attempt was made to format when function menu item HOME >F3: REC
INH is set to “ON”.
Set F3: REC INH to “OFF” and try formatting again.
Auto Formatting was not
Completed.
This appears when auto formatting fails.
Video Resolution Differ from
it on Clip List.
This appears when an attempt is made to add a clip to a clip list containing clips with a different
video resolution (number of system lines).
It is not possible to add clips to clip lists containing clips with a different video resolution.
No Clip Meets the Condition. This appears when no clip is found to meet clip filtering conditions.
Alarm message in time
data display area
Alarm message in video monitor screen Action
No INPUT!
a)
INPUT VIDEO IS NOT DETECTED.
CHECK THE VIDEO INPUT MODE AND
SUPPLY A VIDEO SIGNAL TO VIDEO
INPUT.
• Check the setting of V INPUT on Page P1 VIDEO of
the function menu
• Input an HDSDI signal.
EMPHASIS!
a)
INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
Check the emphasis of the audio input signal.
REF NON-STD
A NON-STANDARD REF SIGNAL IS
BEING USED FOR REF VIDEO. USE A
STANDARD SIGNAL.
Input a standard signal.
Alarm message in GUI
screen
Description/action
Alarm message in time
data display area
Alarm message in video monitor screen Action
FAN Stopped
FAN MOTOR STOPPED.
Contact your Sony service representative.
Note
The unit will not stop operating, but if you continue to
use it in this state temperatures inside the unit or the
drive will rise, possibly resulting in failure or fire.
DR-FAN Stop
DRIVE FAN MOTOR STOPPED.
High TEMP!
HIGH TEMPERATURE.
HIGH TEMPERATURE IN DRIVE.
BATT EMPTY!
BATTERY EMPTY!
Change the battery.
Unknown USB
UNKNOWN USB DEVICE.
The USB connector of this unit is for maintenance
purposes and connection of USB devices. Connect a
compatible USB device.
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...