![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494130.webp)
130
Setup Menu
Chapt
er
7
Men
us
740
MASTER LEVEL (HD)
Adjust the high-definition video signal output from the HDSDI OUTPUT 1,
2 (SUPER) connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 to 0 to 846
741
Y LEVEL (HD)
Adjust the Y level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0 to 846
742
PB LEVEL (HD)
Adjust the PB level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0 to 846
743
PR LEVEL (HD)
Adjust the PR level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0 to 846
745
SETUP LEVEL (HD)
Adjust the setup level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–272 to 0 to 272
746
SYNC PHASE (HD)
Control the H sync phase of the high-definition video signal output from
the HDSDI OUTPUT 1, 2 (SUPER) connectors.
–128 to 0 to 127
747
FINE (HD)
Fine control the H sync phase of the high-definition video signal output
from the HDSDI OUTPUT 1, 2 (SUPER) connectors.
0 to 1023
Menu items in the 800s, relating to audio control
Item number
Item name
Settings
802
DIGITAL AUDIO MUTING IN
SHUTTLE MODE
Set the audio muting conditions during shuttle playback.
off
: Not muted.
on
: Muted.
807
AUDIO OUTPUT PHASE
Set the output timing of digital audio playback signals (HD-SDI, SDI
only), with 80H as a reference position. Output timing is earlier for values
smaller than 80H and later for values greater than 80H. (80H, 128
samples = approx. 2.7 ms, 80H, 1 sample = approx. 20
μ
s)
0 (0 (HEX)) to 80 (80 (HEX)) to FF (FF (HEX)):
Values can be set in this
range.
808
INTERNAL AUDIO SIGNAL
GENERATOR
Select the operation of the internal audio test signal generator.
silnc (silence)
: Silent signal.
1kHz (1kHz sine)
: 1 kHz, –20 dB FS sine wave signal.
When you set the A1 INPUT item on page P2 AUDIO of the function
menu to “SG”, the internal signal generator operates and outputs
simultaneous test signals to channels 1 to 8
823
NON-AUDIO FLAG PB
Control non-audio flags in digital audio output.
Sub-item
1
CH1/CH2
During playback (except E-E mode), set non-audio flags in digital audio
output to the following states.
on:
Set to on (data is non-audio.)
auto:
Set as follows.
• When data is read from disc and confirmed: Follow the data.
• When data from disc is not confirmed: Maintain current state.
2
CH3/CH4
3
CH5/CH6
4
CH7/CH8
824
ANALOG LINE OUTPUT SELECT
Select the analog audio signals (tracks 1 to 8) to be assigned to audio
output channels 1 and 2.
tr1/2
: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4
: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6
: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8
: Tracks 7 and 8 assigned to audio output channels 1 and 2.
Menu items in the 700s, relating to video control
Item number
Item name
Settings
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...