![background image](http://html.mh-extra.com/html/sony/xdcam-pdw-hd1200/xdcam-pdw-hd1200_operation-manual_417494045.webp)
45
Basic Operations of the Function Menu
Chapt
er
3
Pre
par
at
ion
s
P3 AUDIO page
P4 AUDIO page
a) To enable this setting, the following settings are also required, in the same
way as for volume operations for channels 1 to 4.
- Set the VARIABLE switch of the front panel to “REC” or “PB”.
- Set setup menu item 131 AUDIO VOLUME to “EACH”.
P5 TC page
F6: LEVEL MT
Specifies the position at which to
superimpose audio level meters in the
video monitor screen (in full-screen
display mode).
OFF:
Do not superimpose.
LEFT:
Superimpose the audio level
meters of 2 channels on the left side.
RIGHT:
Superimpose the audio level
meters of 2 channels on the right
side.
LEFT(4):
Superimpose the audio level
meters of 4 channels on the left side.
RIGHT(4):
Superimpose the audio level
meters of 4 channels on the right
side.
LEFT(8):
Superimpose the audio level
meters of 8 channels on the left side.
RIGHT(8):
Superimpose the audio level
meters of 8 channels on the right
side.
Item
Setting
F1: A3 INPUT
Selects the audio input signal to assign
to audio channel 3.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Analog 1 audio signal
F2: A4 INPUT
Selects the audio input signal to assign
to audio channel 4.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Analog 2 audio signal
F3: A5 INPUT
Selects the audio input signal to assign
to audio channel 5.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Analog 1 audio signal
F4: A6 INPUT
Selects the audio input signal to assign
to audio channel 6.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Analog 2 audio signal
F5: A7 INPUT
Selects the audio input signal to assign
to audio channel 7.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Analog 1 audio signal
F6: A8 INPUT
Selects the audio input signal to assign
to audio channel 8.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Analog 2 audio signal
Item
Setting
Item
Setting
F1: A5 VOL
Sets the volume of audio channel 5.
a)
The volume can be adjusted within the
range from –200 to +200 (–
∞
to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F2: A6 VOL
Sets the volume of audio channel 6.
a)
The volume can be adjusted within the
range from –200 to +200 (–
∞
to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F3: A7 VOL
Sets the volume of audio channel 7.
a)
The volume can be adjusted within the
range from –200 to +200 (–
∞
to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F4: A8 VOL
Sets the volume of audio channel 8.
a)
The volume can be adjusted within the
range from –200 to +200 (–
∞
to +12 dB)
by turning the PUSH SET(S.SEL) knob.
F5:–
(Unassigned function button)
F6: AU METER
Selects the display mode of the audio
level meters.
FULL:
Display the range from –60 dB to
0 dB.
FINE:
Display a magnified section with
0.25 dB step marks.
Item
Setting
F1: TCG
Selects the timecode signal to which the
internal timecode generator
synchronizes.
INT:
Follow the initial value set from the
control panel or remotely from the
device connected to the
REMOTE(9P) connector, or
synchronize to timecode played
back from the disc.
EXT:
Synchronize to external timecode
input to the TIME CODE IN
connector.
SDI:
Synchronize to timecode
embedded into SDI signal input to
SD/HDSDI INPUT connector.
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...