Sony UP-CX2, Руководство по обслуживанию

Страница: 84 / 122

6-2 (E)
UP-CX2
Version upgrade procedure
1. Connect PC to the USB connector (CN500 on the MA-140 board) on the rear panel of this unit using
a USB cable.
2. Double-click the update module using PC and start it.
3. After that, operate according to the screen of the update module.
n
Refer to “2-5. MA-140 Board”, too.
Download of printer driver
.
For obtaining the latest printer driver, please contact your local Sony Sales Of fi ce/Service Center.
.
Refer to the “Sony digital photo printer page” below for the latest information of a printer driver.
Japanese: http://www.sony.co.jp/Products/DP-driver/index.html
English: http://www.sony.net/Products/DP-driver/index.html
6-3. Printing Image Defects
n
When cleaning the thermal head, use the supplied cleaning cartridge. Use dried soft cloth unless otherwise
speci
fi ed.
When using alcohol, use the soft cloth dampened with a small amount of alcohol.
(Refer to Sections 1-10 and 2-2-1.)
Symptom Cause Treatment
White streaks in the paper feed direction
appear on the printing side. Foreign particles clung to the
thermal head. Clean the thermal head.
Breakage of thermal head Replace the thermal head.
Black streaks in the paper feed direction
appear on the printing side. Defective thermal head Replace the thermal head.
Scratches in the paper feed direction appear
on the printing side. Foreign particles clung to the
thermal head. Clean the thermal head. (
*
1)
Scratches appear on the printing side
periodically in 34 mm pitch. Foreign objects clung to the pinch
roller. Clean the pinch roller. (
*
1)
Scratches appear on the printing side
periodically in 16 mm pitch. Foreign objects clung to the
ribbon (T) roller. Clean the ribbon (T) roller.
White streaks and scratches in the paper
feed direction in the area approx. 12 mm
from the edge of the paper appear during
2UPC-C53/C55 printing. Residual of ribbon clung to the
thermal head. Clean several times using the
cleaning cassette supplied with
the unit.
Fades and scratches in 0 to 2 mm width
appear on the edge of printing side. Residual of ribbon clung to the
thermal head. Clean several times using the
cleaning cassette supplied with
the unit.
Unevenness in the thermal head direction
appear on the printing side in 1 mm or less
pitch. Defective capstan roller Replace the capstan roller.
(
*
1) In case that the foreign object such as paper fi ber or oil clings to the roller, wipe it with ethyl alcohol. Also, perform the cleaning
periodically.