8. Appendix: Usage Precautions
124
Output Voltages of the Unit
The total output power that can be supplied
to peripheral devices from the unit varies
depending on the input voltage to the unit
and the state of the connected accessories.
The maximum output capacity ratings of the
following connectors that can supply power
may not be achieved depending on the
conditions.
LENS connector: 1 A max.
12V OUT connector (2-pin):
1 A max.
24V OUT connector (3-pin):
2 A max. (Input voltage: 22 V to 32 V)
1 A max. (Input voltage: 11 V to 17 V)
The power delivery rating available for
accessories (DVF-EL200 and CBK-3610XS) and
peripheral devices is limited depending on the
input voltage to the unit.
Voltage of power supply to the unit: X [V]
Total power rating of peripheral devices:
Y [W]
Power consumption of the unit: Z [W]
1)
Power consumption of the DVF-EL200:
Approx. 2.5 W
Power consumption of the CBK-3610XS:
Approx. 3.9 W
Y [W] = X [V] × 9.0 [A]
*
– (Z +
+
) [W]
* If X [V] × 9.0 [A] exceeds 220 [W], perform the
calculation using 220 [W].
When supplying power to the above attached
accessories and peripheral devices, make sure
that the value Y given by the equation above
does not become negative. It is recommended
that the maximum power consumption value
of the unit be used for the power consumption
of the unit.
1)
(Note that the equation does not apply if the
calculated result Y exceeds the sum of the
maximum allowable output power of each
power output connector.)
1) MPC-3628:
Unit nominal power consumption: Approx. 76 W (8.6K
3:2, 24 FPS, X-OCN XT recording)
Unit maximum power consumption: Approx. 100 W
(8.2K 17:9, 60 FPS, X-OCN ST recording, 40 °C (104 °F)
environment, 32 V DC input)
MPC-3626:
Unit nominal power consumption: Approx. 73 W (6K
3:2, 24 FPS, X-OCN XT recording)
Unit maximum power consumption: Approx. 94 W
(6K 3:2, 60 FPS, X-OCN ST recording, 40 °C (104 °F)
environment, 32 V DC input)
Notes on Security
• SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND RESULTING FROM A FAILURE
TO IMPLEMENT PROPER SECURITY
MEASURES ON TRANSMISSION DEVICES,
UNAVOIDABLE DATA LEAKS RESULTING
FROM TRANSMISSION SPECIFICATIONS, OR
SECURITY PROBLEMS OF ANY KIND.
• Depending on the operating environment,
unauthorized third parties on the network
may be able to access the unit. When
connecting the unit to the network, be sure
to confirm that the network is protected
securely.
• From a safety standpoint, when using
the unit connected with the network, it
is strongly recommended to access the
Control window via a Web browser and
change the access limitation settings from
the factory preset values (page 87).
Changing the password regularly is also
recommended.
• Do not browse any other website in the
Web browser while making settings or after
making settings. Since the login status
remains in the Web browser, close the Web
browser when you complete the settings
to prevent unauthorized third parties from
using the unit or harmful programs from
running.
