5. Shooting: Useful Functions
110
Viewfinder Double Speed Scan
Function
If the project frame rate is 23.98P, 24P, 25P, or
29.97P, the image may become blurred and
hard to see due to low frame frequency when
you shoot while swaying the unit to the right
and the left.
In this case, you can decrease image blur
and make it easier to see by activating the
viewfinder double speed scan function.
To activate the function, set Monitoring > VF
Function > Double Speed Scan (page 78) in
the full menu to On.
[Notes]
• When this function is activated, the shutter angle
of the electronic shutter function is limited to 180
degrees or lower.
• This function is set to Off during variable speed
shooting.
• This function is enabled for the following
combinations of image size and project frame rate.
MPC-3628:
5.8K 6:5 (23.98p, 24p)
5.8K 17:9 (23.98p, 24p, 25p, 29.97p)
5.4K 16:9 (23.98p, 24p, 25p, 29.97p)
MPC-3626:
4K 4:3 (23.98p, 24p)
4K 17:9 (23.98p, 24p, 25p, 29.97p)
4K 17:9 Surround View (23.98p, 24p)
4K 2.39:1 (23.98p, 24p, 25p, 29.97p)
3.8K 16:9 (23.98p, 24p, 25p, 29.97p)
3.8K 16:9 Surround View (23.98p, 24p)
User 3D LUT
You can load a CUBE file (*.cube) for a
17-point, 33-point, or 65-point 3D LUT created
using RAW Viewer or DaVinci Resolve (by
Blackmagic Design Pty. Ltd.) (page 41).
You can also load a User 3D LUT file into the
unit via a network (page 104).
Set Input Color Space to match the input color
space of when the CUBE file was created.
If the file was created using S-Gamut3.Cine/
SLog3, set Project category > Basic Setting >
Input Color Space (page 72) in the menu to
S-Gamut3.Cine/SLog3.
Save the User 3D LUT file in the following
directory on the SD card.
PRIVATE\SONY\PRO\LUT\
[Note]
A 65-point cube data is reduced to a 33-point cube and
then loaded.
ART
You can import ART (Advanced Rendering
Transform) files (*.art) created using RAW
Viewer into the camcorder (page 41).
You can also load an ART file into the unit via a
network (page 105).
An ART file is a Sony proprietary Look file
created in a binary format. Using an ART file
supports higher quality monitor output than
importing a user 3D LUT into the unit.
Save the created ART file for the unit in the
following directory on the SD card.
MPC-3628:
PRIVATE\SONY\PRO\CAMERA\MPC3628
MPC-3626:
PRIVATE\SONY\PRO\CAMERA\MPC3626
[Note]
MPC-3610 ART files are not compatible.
ASC CDL
You can import ASC CDL (The American
Society of Cinematographers Color Decision
List) files (*.cdl) created by external tools into
the unit (page 42).
You can also load an ASC CDL file into the unit
via a network (page 105).
This allows you shoot with ASC CDL
parameters applied to the Look.
Save the ASC CDL file in the following directory
on the SD card.
PRIVATE\SONY\PRO\CDL\
You can also change ASC CDL parameters
via a web browser and control them using
Livegrade from Pomfort.
