Sony MAVE-F555, Руководство по эксплуатации

Страница: 97 / 162

Chapter 2 Preparations
2-1 (E)
2-1 Example System Configurations and Device
Connections
2-1-1 Example System Configuration (1) - for Linear/Nonlinear Editing
The following shows an example system configuration for a linear-like
nonlinear editing system, in combination with a BVE-series editor.
1 2 3 4
MEMORY
CUT DISS WIPE TITLE AUDIO
REDO
UNDO
V A1 A2 A3 A4
TRIM
MARK
SPLIT
EFFECT
R
STORE + -
P1 P2 BG
PORT/FILE ASSIGN
DEL
FILE NEW
FILE
FILE
MARK OUT MARK IN
REPLAY
PREVIEW
EXECUTE/
REC
SHIFT
MAV VTR
RECORDER SEL BACK GROUND
CONTROL PANEL PANEL SELECT CHARACTER
REAR FRONT 1 2 3 NONE OFF ON 80TH
SETUP
SELECT
COMPOSITE SDI
VIDEO
INPUT
REMOTE R1
PORT SELECT
R2/
P3
P1
P2
INPUT
SDI
AES/EBU
ANALOG
CH1
CH1
PRESET
AUDIO INPUT / MONITOR SELECT
CH2 CH3 CH4
MONITOR L
R
METER
PANEL
525
REMOTE
MENU
LOCAL
CONTROL
PANEL
625 SETUP BANK
TOTAL /
REMAIN
PROCESS
CONTROL VIDEO
CHROMA
SET UP/BLACK
CHROMA/PHASE
PHONES
1 2 3
SYSTEM HDD
HELP
FULL /
TIME
TC/UB TC TYPE
MENU
10
SET
0
CH2
PRESET
CH3
PRESET
CH4
PRESET
VIDEO/MENU
PRESET
For Player-2
For Recorder
Player-1
RS-422
RS-422
RS-422
Analog Audio
Composite
Feed
(SDI/Composite)
Composite
MAVE-F555
MAV-555
BKMA-570
AV SELECTOR
MXP-29
VTR
BVE-600
With the configuration shown above, the following two states can be used,
with a single button operation to switch between them: (1) the MAV-555
RP port as recorder, the VTR as player 1, and the MAV-555 P2 port as
player 2, and (2) the VTR as recorder, the MAV-555 RP port as player 1,
and the MAV-555 P2 port as player 2. This switching operation is referred
to as the MAVE-F555 "recorder selection function."
In state (1), you can exploit the features of the MAV-555 for nonlinear
editing (for material on the recorder, cut jump, cut insertion, deletion, and so
on). You can seamlessly carry out operations such as using the BVE-series
editor search dial to search for an edit point, and using the MAVE-F555 keys
to specify edit points or execute editing, thus realizing extremely smooth
nonlinear editing operations. On the other hand, by switching to state (2), you
can easily transfer the editing results created on the MAV-555 to a VTR.
Further, you can also carry out background recording/playback controlled
from the MAVE-F555.
Note
To be connected to the MAVE-F555, the MAV-555 must be at least version 1.30.
For details of the device connections for this example system configuration, see the
section "Connection with the TO MAV connector" (page 2-3).
For details of operations for this example system configuration, see Chapter 3.
For details of the recorder selection function, see Section 3-4, "Recorder Selection
Function" (page 3-42).
Chapter2
Preparations