Sony MAVE-F555, Руководство по эксплуатации

Страница: 88 / 162

6 (E)
About This Operation Manual
Chapter 2 Preparations
2-3 (E)
2-1-3 Connecting the MAVE-F555 and MAV-555
Connection with the TO MAV connector
To fully exploit the nonlinear editing, background operation, recorder selection
function, and other functions of the MAVE-F555, connect the TO MAV
connector of the MAVE-F555 to the REMOTE SPARE connector of the
MAV-555. Connections of other devices to the MAV-555 are the same as
when the MAV-555 operation mode is set to BVE mode.
IN1(EDITOR R) IN2(EDITOR P) POWER
OUT1(MAV P1)
TO MAV
OUT2(VTR)
1
TO MAV(PARALLEL I/O)
DC IN(12V)
2
D555 I/F AV SEL OUT
ANALOG IN1
ANALOG IN2
BKMA-570
MAV-555
MAVE-F555
BVE-600
MXP-29
VTR
AV SELECTOR
ANALOG OUT2
ANALOG OUT1
VIDEO IN COMPOSITE R2
VIDEO OUT COMPOSITE P2
REMO
TE IN4(P2)
P2 REMO
TE
R REMO
TE
P1 REMO
TE
R MIC /LINE IN P1 MIC /LINE IN LINE OUT P2 MIC /LINE IN
REMO
TE IN2(P1)
REMO
TE IN
REMO
TE SP
ARE
VIDEO OUT COMPOSITE P1 VIDEO IN COMPOSITE R1
ANALOG COMPOSITE IN ANALOG COMPOSITE OUT
ANALOG
AUDIO OUT
RECORDER MONITOR
COMPOSITE VIDEO IN P1
VIDEO OUT
MIXER REMOTE EDITOR
ANALOG
AUDIO IN
MONIT
OR
OUT
For details of RS-422 connections between the MAVE-F555 and other devices, see
Section 3-4, "Recorder Selection Function" (page 3-42).
BVM-series or other
video monitor
How to use this manual
Procedure descriptions
Numerals attached to buttons and switches in illustrations indicate the
corresponding steps of a procedure. They are also used to indicate switches
used in an operation, indicators which must be checked, information
superimposed on the monitor screen (the MONITOR OUT output of the
MAV-555), and so on.
Cross-references to related information in this manual or other documentation
are in italics, and show the item to be referred to and the page number. When
the related information is in a manual other than this manual, the cross-
reference gives the title of the other manual.
3-10 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
3-2 Operations for Nonlinear Editing (Operations in Cut Units)
3-2-1 Cut Jump Function (Cueing Up to a Cut Point)
You can cue up to successive cut points in the file subject to editing loaded on
the MAV-555 port. This is termed a "Cut jump."
NOTE
• The cut jump function makes it possible to jump to the beginning of any cut.
• Cut point information is discarded when the MAV-555’s power is turned off.
To perform a cut jump
REDO
UNDO
V A1 A2 A3 A4
TRIM
MARK
SPLIT
MARK OUT MARK IN
To perform a cut jump, use the following procedure.
1
Using the channel specification keys (V, A1, A2, A3, and A4), select the
channel on which you want to search for the cut point.
Press the key corresponding to the channel on which you want to search
for the cut point, turning on the indicator above the key. You can select
more than one channel.
2
Press the [
B?
] or [
?b
] key to jump to the next or previous cut point.
• When you press the key to execute the cut jump, the indicator for the
channel specification key corresponding to the channel on which the cut
point was found lights during the cut jump operation.
1
2
Example description
About This Operation Manual
Switches and other controls
used in the step described
below
Step number within a
procedure
Results of an operation or
other related information
Description of the operation
Cross-reference