Sony MAVE-F555, Руководство по эксплуатации

Страница: 124 / 162

3-22 (E)
Chapter 3 Operations for Linear/Nonlinear Editing
3-2 Operations for Nonlinear Editing (Operations in Cut Units)
Replacing a section on the recorder with another cut specified on
the recorder
To specify the section for a cut to replace a specified position within the same
file on the recorder, use the following procedure.
REDO
UNDO
V A1 A2 A3 A4
TRIM
MARK
SPLIT
MARK OUT MARK IN
REPLAY
PREVIEW
EXECUTE/
REC
SHIFT
R
STORE
+ -
P1 P2 BG
PORT/FILE ASSIGN
1
Press the [ ] key, to select INSERT mode.
2
Select the recorder port.
3
Using the jog dial of the BVE-series editor, for example, search for the IN
point.
4
Holding down the SHIFT key on the MAVE-F555, press the MARK IN
key.
• This specifies the IN point for the source for the replacement cut.
5
As for the IN point, using the jog dial of the BVE-series editor, for
example, search for the OUT point.
6
Holding down the SHIFT key on the MAVE-F555, press the MARK OUT
key.
• This specifies the OUT point for the source for the replacement cut.
7
Now continue from step 8 of the procedure under "Replacing a section on
the recorder with a cut specified on the player" (page 3-20).
6
4
1
2
4,6