Sony HDW-790, Руководство по эксплуатации

Страница: 58 / 176

58
Setting the Stand-by off Timer During Rec-Pause
Chapt
er
3
Re
c
o
rdin
g and Pl
a
y
b
a
c
k
3-6 Setting the Stand-by
off Timer During Rec-
Pause
The VTR SAVE/STBY switch allows you to control the
VTR power mode during pauses in recording (rec-pause)
or when stopped.
However, even in the standby mode (with the VTR SAVE/
STBY switch set to STBY), you can set the VTR in such a
way that the mode is automatically switched from the
standby mode to save mode when the tape does not run for
a preset time, using the VTR MODE page of the
MAINTENANCE menu.
1
Follow steps 1 to 4 in “Setting for recording good shot
marks on the LTC-UBIT area on the tape” (page 39)
to display the VTR MODE page of the
MAINTENANCE menu.
2
Turn the MENU knob to move the
b
mark to STBY
OFF TIMER, then push the MENU knob.
The
b
mark on the left of STBY OFF TIMER changes
to a z mark, and the z mark on the left of the setting
changes to a ? mark.
3
Turn the MENU knob clockwise or counterclockwise
until the desired STBY OFF TIMER appears.
When you turn the MENU knob clockwise or
counterclockwise, STBY OFF TIMER changes in the
following sequence: 60MIN
y
30MIN
y
10MIN
y
5MIN
y
OFF.
In order not to enter in the VTR SAVE mode, select
OFF.
To enter the VTR SAVE mode, select the desired time.
4
Push the MENU knob.
The z mark on the left of STBY OFF TIMER returns
to an
b
mark, and the ? mark to the left of the setting
returns to the z mark.
5
To end menu operations, set the MENU ON/OFF
switch to OFF.