Sony HDW-790, Руководство по эксплуатации

Страница: 153 / 176

153
Menu List
Ap
pend
ix
e
s
P05 BLACK GAMMA BLACK GAMMA OFF/ON OFF Turns the black gamma correction on/off.
BLACK GAM RANGE LOW/L.MID/
H.MID/HIGH HIGH Sets the range affected by black gamma.
MASTER BLK
GAMMA (–99 to 99) 0 Adjusts the master black gamma.
R BLACK GAMMA (–99 to 99) 0 Sets the correction curve of the R black
gamma.
G BLACK GAMMA (–99 to 99) 0 Sets the correction curve of the G black
gamma.
B BLACK GAMMA (–99 to 99) 0 Sets the correction curve of the B black
gamma.
OUTPUT SELECT
1) Y/R/G/B Y Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
OUT
2)
.
P06 KNEE 1 KNEE OFF/ON ON Turns the knee correction circuit on/off.
KNEE POINT (M) 50.0 to 109.0 95.0 Sets the master knee point level.
KNEE SLOPE (M) (–99 to 99) 0 Set the master knee slope level.
KNEE SATURATION OFF/ON ON Turns the knee saturation function on/off.
KNEE SAT LEVEL (–99 to 99) 0 Sets the knee saturation level.
WHITE CLIP OFF/ON ON Turns the white clipping function on/off.
WHITE CLIP LEVEL 100.0 to 109.5
109.0
3) Adjusts the white clipping level.
P07 KNEE 2 KNEE SATURATION OFF/ON OFF Turns the knee saturation function on/off.
KNEE POINT (R) –45.0 to 14.0 0.0 Sets the R knee point level.
KNEE SLOPE (R) (–99 to 99) 0 Sets the R knee slope level.
KNEE POINT (G) –45.0 to 14.0 00 Sets the G knee point level.
KNEE SLOPE (G) (–99 to 99) 0 Sets the G knee slope level.
KNEE POINT (B) –45.0 to 14.0 0.0 Sets the B knee point level.
KNEE SLOPE (B) (–99 to 99) 0 Sets the B knee slope level.
P08 DETAIL 1 DETAIL OFF/ON ON Sets the detail correction function on/off.
APERTURE OFF/ON ON Turns the aperture correction function on/off.
DETAIL LEVEL (–99 to 99) 0 Sets the general level of the detail signal.
APERTURE LEVEL (–1 to 14) 0 Sets the aperture level.
DTL H/V RATIO (–99 to 99) 0 Sets the level of the V detail signal.
CRISPENING (–99 to 99) 0 Sets the crispening level.
LEVEL DEPEND OFF/ON ON Turns the level depend function on/off.
LEVEL DEPEND LVL (–99 to 99) 0 Sets the level of the level depend function.
DETAIL FREQ (–99 to 99) 0 Sets the frequency of the H detail signal.
P09 DETAIL 2 KNEE APERTURE OFF/ON OFF Turns the knee aperture function on/off.
KNEE APT LEVEL (–99 to 99) 0 Sets the knee aperture level.
DTL WHT LIMIT (–99 to 99) 0 Sets the detail white limiter.
DTL BLK LIMIT (–99 to 99) 0 Sets the detail black limiter.
DTL V-BLK LMT (–99 to 99) 0 Sets the V detail black limiter.
H/V CONTROL MODE H/V / V V Select the operation mode of DETAIL H/V
RATIO on the DETAIL 1 page. (H/V: H and V
both enabled, V: V DTL only enabled)
No. Page Item Settings Default Description