background image

170

About a “Memory Stick”

  

Ap
pend

ix

e

s

• Do not attach anything other than the supplied label to 

the “Memory Stick” labeling position. 

• Attach the label so that it does not stick out beyond the 

labeling position.

• Carry and store the “Memory Stick” in its case.
• Do not touch the connector of the “Memory Stick” with 

anything, including your finger or metallic objects.

• Do not strike, bend, or drop the “Memory Stick”.
• Do not disassemble or modify the “Memory Stick”.
• Do not allow the “Memory Stick” to get wet.
• Do not use or store the “Memory Stick” in a location that 

is:
— Extremely hot, such as in a car parked in the sun
— Under direct sunlight
— Very humid or subject to corrosive substances

ACCESS Indicator

If the access indicator is turned on or is flashing, data is 
being read from or written to the “Memory Stick”. At this 
time, do not shake the computer or product or subject them 
to shock. Do not turn off the power of the computer and 
product or remove the “Memory Stick”. This may damage 
the data.

Precautions

• To prevent data loss, make backups of data frequently. In 

no event will Sony be liable for any loss of data.

• Unauthorized recording may be contrary to the 

provisions of copyright law. When you use a “Memory 
Stick” that has been pre-recorded, be sure that the 
material has been recorded in accordance with copyright 
and other applicable laws.

• The “Memory Stick” application software may be 

modified or changed by Sony without prior notice.

• Note that there are certain restrictions on recording stage 

performances and other entertainment events, even if 
they are recorded for personal use only.

Notes

• “Memory Stick”, 

 and “MagicGate Memory 

Stick” are trademarks of Sony Corporation.

• “Memory Stick Duo” and 

 are 

trademarks of Sony Corporation.

• “Memory Stick PRO” and 

 are 

trademarks of Sony Corporation.

• “Memory Stick PRO Duo” and 

 are 

trademarks of Sony Corporation.

• “Memory Stick-ROM” and 

 are 

trademarks of Sony Corporation.

• “MagicGate Memory Stick” is trademark of Sony 

Corporation.

• “MagicGate” and 

 are trademarks of Sony 

Corporation.

Содержание HDW-790

















































































































































































Отзывы: