Sony DVS-9000, Руководство пользователя

Страница: 949 / 1228

949
Macro File Editing Rules
A
ppen
dix
(V
ol
ume 2)
Macro File Editing Rules
When editing a macro file, follow the rules described below.
Macro File Syntax
The macro file syntax is as follows.
File format
The file is in CSV (comma-separated value) format.
Newline code
CR (ASCII code 0D), LF (ASCII code 0A), or CRLF may be used.
Statement syntax
There are four types of statement, each terminated by a newline code.
File header: This must always appear as the first line of the file. It comprises
28 characters, as follows.
Example: PNL (space) 0001PNL_rrrr.PMRnnnnnnnn
rrrr: macro register number (0001 to 0099)
nnnnnnnn: In a file created on the switcher, this is a register name
automatically set by the switcher.
When creating a new file, it is recommended to set this to be the same as
the file name
(see page 951) .
The name is limited to eight characters.
The following characters may not be used.
space, \, /, :, ;, , (comma), . (dot), <, >, *, ?, “ ”
Comment: Begins with “#”. The content of the line following the “#” up to the
next newline has no effect on macro execution, and can be used as a
comment.
Note
You can only use comments in files saved to the hard disk or a memory
card. When you load a macro file into a register, the comments are
discarded.
Event statement: Begins with “Event?”, and defines the macro event. (See
next item, “Syntax of Event and Continue Statements.”)
Continue statement: Begins with “Continue?”, and defines the macro event.
(See next item, “Syntax of Event and Continue Statements.”)