Sony DVS-9000, Руководство пользователя, Страница: 233 / 1228

233
Key Setting Operations Using Menus
C
h
ap
te
r 4
K
e
ys
Applying a DME Effect to a Key
Note
For one M/E bank, DME effects (including DME wipes) can be used in up to
two places on the dedicated interface and in only one place on the SDI interface
simultaneously.
When combining the SDI interface with the dedicated interface, you can apply
DME effects to a maximum of three keys. (Requires a setting in setup.)
For details, see “Interfacing With External Devices (Device Interface Menu)”
in Chapter 19 (Volume 3).
Assigning a DME to a key
1
In the M/E-1 >Key1 menu, select HF5 ‘Processed Key.’
The Processed Key menu appears.
2
In the <DME Select> group, select the DME channel (DME1 to DME8) to
be used.
The lit colors of [DME1] to [DME8] indicate the DME assignment.
Lit green: Shows the DME assigned to the currently selected key.
Lit amber: Shows the DME assigned to a key other than the currently
selected key.
Off: DME is not assigned.
To select a DME being used by another keyer
Press [Override], turning it on, then select the DME channel.
The later selection is valid, and the button lights green.
Using two or three DME channels on one keyer
When using the DME dedicated interface, proceed as follows.
1
Select the DME for the first channel (see the previous item, “Assigning a
DME to a key”), then select the successive channel for the second channel.
For the third channel select the channel after that.
2
To select the video signal for the second channel, hold down the [UTIL]
button in the cross-point control block, and select the signal in the Key1
row (DME external video bus).