97
Editing
You can record additional audio to the original sound on the tape by connecting audio
equipment or a microphone. If you connect the audio equipment, you can add sound to
your tape already recorded in the 12-bit mode by specifying starting and ending points.
The original sound will not be erased.
Preparing for audio dubbing
You can record additional audio in the following:
• Dubbing with the built-in microphone
• Connecting the microphone (optional) to the MIC jack
• Connecting the microphone (optional) to the intelligent accessory shoe
• Connecting the A/V connecting cable to the AUDIO/VIDEO jack (DCR-TRV22/
TRV33 only)
The audio input to be recorded will take precedence over others in the following order:
• MIC jack
• Intelligent accessory shoe
• AUDIO/VIDEO jack (DCR-TRV22/TRV33 only)
• Built-in microphone
Dubbing with the built-in microphone
No connection is necessary. (If no external microphone is connected, audio recording
will be performed automatically by the built-in microphone.)
Connecting the microphone (optional) to the MIC jack
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack
to a TV.
The recorded sound is not output from the speaker. Check the sound by using the
headphones or TV.
Audio dubbing
MIC (PLUG IN
POWER)
Microphone
(optional)
: Signal flow
Содержание DCR-TRV33 PIXELA ImageMixer v1.5
Страница 8: ...DCR TRV33 TRV33E 8 Sony EMCS Co 2003B1600 1 2003 2 Published by DI Customer Center 9 876 223 41 ...
Страница 228: ...Printed in Japan Printed on 100 recycled paper using VOC Volatile Organic Compound free vegetable oil based ink ...
Страница 229: ...Revision History 987622341 pdf Reverse Ver 1 0 Date 2003 02 History Official Release Contents S M Rev issued ...