41
Playback – Basics
Using the Remote Commander
Press DATA CODE on the Remote Commander during playback.
The display changes as follows:
date/time
t
various settings (SteadyShot off, exposure, white balance, gain, shutter
speed, aperture value)
t
(no indicator)
t
date/time
t
...
To prevent the various data from being displayed
Select DATE in DATA CODE in
in the menu setting (p. 184).
Each time you press DATA CODE on the Remote Commander, the display changes as
follows:
data/time
y
(no indicator)
Note
If you press DATA CODE on the Remote Commander when the POWER switch is set
to OFF (CHG), no indicator appears.
Various settings
Various settings shows your camcorder’s recording information at the time of
recording. During tape recording standby, the various settings will not be displayed.
When you use data code, bars (-- -- --) appear if:
– A blank portion of the tape is being played back.
– The tape is unreadable due to tape damage or noise.
– The tape was recorded by a camcorder without the date and time set.
Data code
When you connect your camcorder to a TV, the data code also appears on the TV
screen.
Playing back tape
Содержание DCR-TRV33 PIXELA ImageMixer v1.5
Страница 8: ...DCR TRV33 TRV33E 8 Sony EMCS Co 2003B1600 1 2003 2 Published by DI Customer Center 9 876 223 41 ...
Страница 228: ...Printed in Japan Printed on 100 recycled paper using VOC Volatile Organic Compound free vegetable oil based ink ...
Страница 229: ...Revision History 987622341 pdf Reverse Ver 1 0 Date 2003 02 History Official Release Contents S M Rev issued ...