Sony DAR-X1R, Руководство по эксплуатации

Страница: 130 / 623

GB
130
GUIDE Plus+ system does not appear.
,
1
Even if you complete “Easy Setup,” TV
programme listings do not appear until the
recorder receives the GUIDE Plus+ data.
2
Turn
off the recorder, but do not unplug it.
3
Wait for
24 hours. It may take several days for the
recorder to receive the GUIDE Plus+ data for all
programme positions. If the recorder does not
receive the GUIDE Plus+ data after 24 hours, set
the host channel manually (page 62).
,
The postal code is incorrect. Correctly set your
postal code (page 61).
,
When the recorder is connected to a set top box
receiver, the set top box receiver must be turned
on to download the GUIDE Plus+ data.
,
Area numbers that cannot be received using
GUIDE Plus+ are set. Select “Easy Setup” from
“SETUP” in the System Menu, and follow the
on-screen instructions to make the settings again
(page 27).
,
The “Time Lock” function on your cable box is
activated. Set this function to off.
,
GUIDE Plus+ function is available only in areas
with GUIDE Plus+ service.
The programme position number in the
programme listing does not match the
broadcast station.
,
There may be more than one channel lineup for
your area. To change the channel lineup, select
“Editor” in the Menu Bar of the GUIDE Plus+
system (page 62).
Programme listings for some programme
positions are missing.
, The programme guide data may not be updated.
Turn off the recorder and let the recorder receive
the programme guide data.
, Some broadcast stations support only two days
of data. For details, see the following website:
www.europe.guideplus.com
, All of the GUIDE Plus+ data could not be
received because the reception is poor.
The programme listing is not up to date.
,
The recorder was in use during the time that the
GUIDE Plus+ data was scheduled to be
downloaded.
,
All of the GUIDE Plus+ data could not be
received because the reception is poor.
There is no sound.
, Re-connect all connections securely.
,
The connecting cord is damaged.
, The speaker cord is not connected securely.
, Press MUTING on the remote if “MUTING ON”
is displayed in the front panel display.
, The recorder is in reverse play, fast-forward,
slow motion, or pause mode.
,
When “D.IN” blinks on the front panel display,
check the connection to the LINE 3/DECODER
and LINE 3 DIGITAL IN (OPTICAL) jacks.
,
The recorder supports only MP3 audio for DivX
video files. Press
(audio) and select MP3
audio.
,
If the audio signal does not come through the
LINE 3 DIGITAL IN (OPTICAL) jack, check
the “Line 3 Input” settings in the “Audio” setup
(page 120).
Severe hum or noise is heard.
, Check that the speakers and components are
connected securely.
, Check that the connecting cords are away from a
transformer or motor, and at least 3 metres away
from your TV set or a fluorescent light.
, Move your TV away from the audio components.
, The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
, Clean the disc.
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
,
Select “STEREO” by pressing (audio)
(page 78).
,
Make sure the system is connected properly.
GUIDE Plus+ system (areas with
GUIDE Plus+ service only)
Sound