Sony DAR-X1R, Руководство по эксплуатации

Страница: 121 / 623

Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
GB
121
The front of each speaker should face parallel
to the calibration mic, and there should be no
obstruction between them.
b
Note
Place the calibration mic so that the “FRONT” side
of it is pointed toward the front speakers.
2
Press SYSTEM MENU.
The System Menu appears.
3
Select “SETUP,” and press .
4
Select “Audio,” and press .
5
Select “Auto Calibration,” and press .
6
Select “Yes,” and press .
Calibration starts.
b
Notes
• Avoid being in the measurement area and making
noise during the measurement (about 1 minute), to
avoid measurement failure. During the
measurement, test signals are output from the
speakers.
• Reflections from walls or the floor may affect
measurements.
• If an error message appears, follow the message,
then select “Yes”.
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– subwoofer is not connected.
– the left and right speakers are reversed.
– the left and right of the calibration mic are
reversed.
Top view
Calibration mic
Front speaker (L) Front speaker (R)
Parallel
FRONT
, continued